Steel Bars, Stainless, 12% Chromium, for Turbine A
his specification identifies hot rolled, heat treated and descaled 12% Chromium, UNS S42200 martensitic stainless steel bars
S42200
March 03, 2023
Thermodynamic calculation of equilibrium phases in
Custom450 is awidelyused maragingstainlesssteel, and the melting method and chemical composition vari ations in different batches have a significant effect on its properties
Custom-450
March 02, 2023
Custom 450® stainless is a martensitic age-hardena
Custom 450® stainless is a martensitic age-hardenable stainless steel which exhibits very good corrosion resistance with moderate strength. Custom 450 has a yield strength somewhat greater than 690MPa in the annealed condition.
Custom-450
March 02, 2023
GTD 450 Blades of Gas Turbine Material
GTD 450 Blades of Gas Turbine Material, UNS S45000, Custom 450® Stainless, Precipitation hardening stainless steel, used for compressor blading.
450
February 23, 2023
Metallurgical Analysis and Simulation of a Service
Metallurgical Analysis and Simulation of a Service-Fractured Compressor Blade Made of ASTM S45000 Alloy
450
February 23, 2023
HY-80 high strength steel
HY-80 is high strength steel used in a quenched and tempered condition to achieve mechanical properties such as ship and submarine hulls
HY-80
January 18, 2023
Chemical composition optimization, microstructure
Due to the high efficiency, reduced environmental pollution and high reliab ultra-supercritical coal-fired technology becomes the world leading commercialized power generation technology. The ultra-su
Nimonic 80A
January 18, 2023
Study and Production of AISI 403 Steel for 300~600
Study and Production of AISI 403 Steel for 300~600MW Turbine Blades
403
January 17, 2023
Study on Welding of Steel 17-4PH for Steam Turbine
Study on Welding of Steel 17-4PH for Steam Turbine Blades