Steel X10CrNiMoV12-2-2 Forged Bars for Steam Turbine Blades
X5CrNiCuNb16-4 ESR Wrought billets or round bars, for subsequent cold cutting and hot forging into turbine blades
Dynamic recrystallization (DRX) process ofa martensitic stainless steel (AISI 422) at temperatures of950, 1000, 1050, 1100 and 1150oC and strain rates of 0.01, 0.1 and 1 s21.
Mechanical properties of 422 stainless steel repaired via wire feed laser welding
Temperature Measurement and Burn Mechanism of Stainless Steel 1Cr11Ni2W2MoV in Grinding
The steel used in the experiment is 422 martensitic stainless steel, its chemical composition is shown in Table 2.1, and the original heat treatment state is hot-rolled and annealed
Due to supercritical (initial steam pressure of 24MPa, initial steam temperature and reheating temperature of 566°C/566°C) and ultra-supercritical (initial steam pressure of 25MPa, initial steam tempe
Thermoplastic Forming Behavior and Microstructure Evolution of 422 Super-critical Blade Steel
Effects of Tempering Temperature on Microstructure and Low-Temperature Toughness of 1000 MPa Grade NiCrMoV Low Carbon Alloyed Steel